+86 13681672718
EN
All Categories

Get in touch

Home> Multiparameter Analyzer

  • M300F multiparameter analyzer
  • M300F multiparameter analyzer
  • M300F multiparameter analyzer
  • M300F multiparameter analyzer
  • M300F multiparameter analyzer
  • M300F multiparameter analyzer

M300F multiparameter analyzer

Get a Free Quote DOWNLOAD

Labtech

 

The M300F multiparameter water quality analyzer through the real name brand this is trusted, is a unit essential who cares in regards to the quality for this water. You've gotten the data and knowledge and knowledge you will need whether you take advantage of research, industry, or want to be just yes, the security linked to standard water, the M300F can be a step-by-step and device dependable might help.

 

The Labtech M300F is only an analyzer this might be effective provides information water dependable is many parameters for instance pH, dissolved atmosphere, conductivity, along with temperature. It is show easy-to-read is truly a task easy learn through Labtech and interpret information proportions for each and each parameter to see just in case water is safe for use, fishing or any other uses along with its LCD.

 

The M300F is offered by having a super taut, handheld design, which makes it very easy to go which makes use of both in interior and outside surroundings. The sensor this will be function incorporated fundamentally the numerous readings being accurate, with only upkeep minimal the gear.

 

Water this is analyzer m300F excessively user-friendly. Its system is straightforward and intuitive, allowing additionally non-experts to configure and run effectively the products. Additionally, its durable design means it a tool industry very good it may probably withstand harsh environmental conditions, making.

 

Using the M300F, you could expect top-notch and measurements being reproducible each analysis. This is particularly essential where accuracy is an important concern contamination preventing is environmental or even in the event of mandated rules for wastewater, consuming or water quality okay

Features

  • High resolution LCD display, 5.7 inches. 
  • Multi-reading feature allows auto-read, timed-read and continuous-read. 
  • Automatic/Manual temperature compensation ensures accurate results. 
  • Auto-hold feature senses and locks the measurement endpoint. 
  • Data Storage 500 sets (GLP-compliant). 
  • Support for USB or RS-232 communication. 
  • Reset feature automatically resumes all settings back to factory default options. 
  • IP54 waterproof. 

pH

  • 1-5 points calibration with Standard Recognition.
  • Selectable pH buffer groups, including NIST, DIN, GB.
  • Automatic electrode diagnosis with pH slope and offset display.

 

Ion

  • 1-5 points calibration.
  • Selectable measurement unit, including μg/L, mg/L, g/L, mmol/L, PX, etc.
  • Multi-measurement modes are supported, including Direct Reading mode, Standard Addition mode, Sample  Addition mode and GRAN mode.
  • Over 10 methods are built-in, including F-, Cl-, Br-, I-, NO3-, BF4-, NH4+, K+, Na+, Ca2+, Cu2+, Pb2+, Ag+ and etc., user-defined method is supported.

 

Conductivity

  • 1-3 points calibration with Standard Recognition.
  • Settable parameters, including cell constant, temperature compensation coefficient and TDS factor.
  • Temperature compensation type (none, linear, pure water).

 

DO

  • Support for air-saturated water or zero oxygen calibration.
  • Auto barometric pressure compensation
  • Manual Salinity Factor Correction
  • Selectable pressure unit, including kPa, mbar, Torr, At
Model No M300F
Parameters 　 pH/EC/ISE/DO/Temp. (mV/ORP/pX/Resistivity/TDS/Sal./DO Saturation)
pH Range -2.00 to 20.00pH
Resolution 0.1, 0.01 pH
Accuracy ±0.01 pH
Calibration Points Up to 5
Standard Customization Yes
Standard Recognition NIST, GB and DIN buffers
Slope Limit Yes
mV Range -2000.0 to 2000.0 mV
Resolution 0.1 mV
Accuracy ±0.3 mV or ±0.1%
pX Range -2.00 to 20.00
Resolution 0.1, 0.01 pX
Accuracy ±0.01 pX
Calibration Points Up to 5
ISE Range 1E-9 to 9.999E9
Unit mol/L, mmol/L, g/L, mg/L, μg/L, ppm
Resolution Up to 4 significant digits
Accuracy ±0.5%
Calibration Points Up to 5
Conductivity Range 0.000 μS/cm to 1000 mS/cm
Resolution 0.001 μS/cm minimum, various with range selection
Accuracy ±1.0% FS
Reference Temperature 20, 25 ºC
Calibration Points Up to 3
Standard Recognition 84μS/cm, 1413μS/cm, 12.88mS/cm
Resistivity Range 5.00 Ω·cm~20.00 MΩ·cm
Resolution 0.01 Ω·cm minimum
Accuracy ±1.0% FS
TDS Range 0.00mg/L~300g/L
Resolution 0.01mg/L minimum, various with range selection 
Accuracy ±1.0% FS
Salinity Range (0.00~8.00)%
Resolution 0.0001
Accuracy ±0.2%
DO Concentration Range 0.00 to 20.00 mg/L
Resolution 0.01mg/L
Accuracy ±0.1mg/L
Calibration Points Air-saturated water or zero point
Barometric Compensation Yes
Manual Salinity Factor Correction Yes
Saturation Range (0.0 to 200.0)%
Resolution 0.001
Accuracy ±2.0%
Temperature Range -5 to 110 ºC, 23 to 230 ºF
Unit ºC, ºF
Resolution 0.1
Accuracy ±0.2
Measurement Reading Mode Auto Read (Fast, Medium, Slow),Timed,Continuous
Reading Prompts Reading, Stable, Locked
Temp. Compensation ATC, MTC
Data management Data Storage 500 results each
GLP Features Yes
Inputs pH Electrode BNC(Q9)
DO with Temp. Probe 4-pin aviation connector
Conductivity with Temp. Probe 5-pin aviation connector
Outputs USB USB 2.0 flash memory device, PC
RS 232 printer
Display options Backlight Yes
Auto Shutdown 1~60 min, off
Date and Time Yes
General Power AC Adapter, 100-240V AC input, DC9V output
Dimensions/ Weight 242×195× 68 mm/900g (1.98 lb)

Standard Accessories

1, E-301-QC PH Probe（three-in-one）

2, DJS-1VTC Conductive Probe with ATC

3, DO-958-O DO Probe

4, NIST pH buffer（PH 4.01, PH 7.00, PH 10.01）for one each bottle-50mL*3

5, 1413μS/cm Standard solution-50mL*1

6, Electrode holder

More Products

Inquiry

Inquiry Email WhatsApp WeChat
Top

Copyright © Shanghai Labtech Co.,Ltd. All Rights Reserved

privacy policy