M310F portable multiparameter analyzer

DOWNLOAD

Features

* LCD display screen, 3.5 inches
* Multi-reading feature allows auto-read, timed-read and continuous-read
* Automatic/Manual temperature compensation ensures accurate results
* Auto-hold feature senses and locks the measurement endpoint
* Data capacity of up to 500 sets for each parameter GLP-compliant
* Support for USB communication
* Auto-power off feature effectively extends the battery service life
* Reset feature automatically resumes all settings back to factory default options
* IP65 waterproof. The portable meter is suitable for fields measurements and out door measurements

pH
* 1-5 points calibration with Standard Recognition
* Selectable pH buffer groups, including NIST, DIN, GB
* Automatic electrode diagnosis with pH slope and offset display

Ion
* 1-5 points calibration
* Selectable measurement unit, including Î¼g/L, mg/L, g/L, mmol/L, pX, ppm, etc
* Measurement modes are supported, including Direct Reading mode, Standard Addition mode, Sample Addition mode and GRAN mode
* Over 10 methods are built-in, including F-, Cl-, Br-, I-, NO3-, BF4-, NH4+, K+, Na+, Ca2+, Cu2+, Pb2+, Ag+ and etc. user-defined method is supported

Conductivity
* 1-3 points calibration with Standard Recognition
* Settable parameters, including cell constant, temperature compensation coefficient, and TDS factor
* Temperature compensation type none, linear, pure water

DO
* Support for air-saturated water or zero oxygen calibration
* Auto barometric pressure compensation
* Manual Salinity Factor Correction
* Selectable pressure unit, including kPa, mbar, Torr, Atm

Model No		M310F
Parameters		pH/EC/ISE/DO/Temp. (mV/ORP/pX/Resistivity/TDS/Sal./DO Saturation)
pH	Range	-2.00 to 20.00pH
	Resolution	0.1, 0.01 pH
	Accuracy	±0.01 pH
	Calibration Points	Up to 5
	Standard Customization	Yes
	Standard Recognition	NIST, GB and DIN buffers
	Slope Limit	Yes
mV	Range	-2000.0 to 2000.0 mV
	Resolution	0.1
	Accuracy	±0.3 mV or ±0.1%
pX	Range	-2.00 to 20.00
	Resolution	0.1, 0.01 pX
	Accuracy	±0.01 pX
	Calibration Points	Up to 5
ISE	Range	1E-9 to 9.999E9
	Units	mol/L, mmol/L, g/L, mg/L, μg/L
	Resolution	Up to 4 significant digits
	Accuracy	±0.5%
	Calibration Points	Up to 5
Conductivity	Range	0.000 μS/cm to 500 mS/cm
	Resolution	0.001 μS/cm minimum, various with range selection
	Accuracy	±1.0% FS
	Reference Temperature	20, 25 ºC
	Calibration Points	Up to 3
	Standard Recognition	84μS/cm, 1413μS/cm, 12.88mS/cm
Resistivity	Range	5.00 Ω·cm~20.00 MΩ·cm
	Resolution	0.01 Ω·cm minimum
	Accuracy	±1.0% FS
TDS	Range	0.00mg/L~300g/L
	Resolution	0.01mg/L minimum, various with range selection
	Accuracy	±1.0%
Salinity	Range	(0.00~8.00)%
	Resolution	0.0001
	Accuracy	±0.2%
Dissolved Oxygen Concentration	Range	0.00 to 50.00 mg/L
	Resolution	0.01mg/L
	Accuracy	±0.1mg/L
	Calibration Points	Air-saturated water or zero point
	Barometric Compensation	Yes
	Manual Salinity Factor Correction	Yes
Saturation	Range	(0.0 to 300.0)%
	Resolution	0.10%
	Accuracy	±10.0%
Temperature	Range	-5 to 110 ºC, 23 to 230 ºF
	Unit	ºC, ºF
	Resolution	0.1
	Relative Accuracy	±0.2
Measurement	Reading Mode	Auto Read (Fast, Medium, Slow), Timed, Continuous
	Reading Prompts	Reading, Stable, Locked
	Temp. Compensation	ATC, MTC
Data management	Data Storage	500 results each
Data management	GLP Features	Yes
Inputs	pH Electrode	BNC(Q9)
	DO with Temp. Probe	4-pin aviation connector
	Conductivity with Temp. Probe	5-pin aviation connector
Outputs	USB	PC, printer
Display options	Backlight	Yes
	Auto Shutdown	300, 600, 1200, 1800, 3600 sec., off
	Date and Time	Yes
General	Power	Rechargeable Lithium battery, AC Adapter, 100-240V AC input, DC5V output
General	Dimensions，Weight	80×255×35 mm，400g (0.88 lb)

Labtech

Introducing the M310F portable multiparameter water quality analyzer from Labtech. Are you concerned with the quality of the drinking water or the water in your lake is local or? The Labtech M310F can assist relieve your worries. Easy-to-use numerous parameters that affect water quality, such as pH, temperature, conductivity, dissolved air and chlorine. Using its easy-to-read display and interface is user-friendly you can quickly obtain accurate readings while making informed choices about how to treat your water. Perfect for a selection of applications such as monitoring drinking water in municipal water treatment facilities tracking changes in water quality in rivers and lakes or checking the quality of water for agricultural irrigation. It can be ideal for use within the industry thanks to its compact design and portable case is carrying. The design is durable that the M310F will withstand the rigors of fieldwork while its rechargeable battery helps to ensure that you'll be able to take measurements all day at a time without needing to end and recharge. Also extremely easy to maintain. You can certainly change away electrodes and sensors making it simple to keep your device functioning at its best. You'll be able to calibrate your device in the field using buffer solutions so you are getting the most accurate readings possible that you know. So if you're looking for a reliable and easy-to-use water quality analyzer the Labtech M310F is the perfect choice. It is the perfect device for anyone who wants to keep an eye on the quality of their water whether at home or in the field.